What Are The Preparation Methods Of Granular Activated Carbon?
Jul 08, 2024
Leave a message
The preparation methods of granular activated carbon can be divided into two categories: 1) direct carbon activation without adding a binder; 2) adding a binder to shape the carbonaceous precursor, and then performing the carbon activation process.
Binder-free method
The preparation of granular activated carbon without adding a binder can be divided into two types: one is to directly activate the natural wood raw materials of a certain shape and size to obtain amorphous granular activated carbon; the other is to prepare granular activated carbon by self-molding by chemical agent activation method without adding a binder.
Abundant shaped natural wood plant raw materials, such as coconut shells, walnut shells, olive kernels and other fruit shells and kernels, can be directly used to prepare amorphous granular activated carbon by physical or chemical activation methods. Poinern et al. used macadamia shells as raw materials, firstly carried out high-temperature carbonization, and then combined with carbon dioxide activation method to prepare granular activated carbon, and explored the effect of activation temperature on the adsorption of gold by activated carbon. The results show that high-temperature activation is conducive to improving the gold absorption capacity of granular activated carbon. He Deliu and others invented the phosphoric acid method to produce wood amorphous granular activated carbon technology. Through pre-crushing, soaking, floating and low-temperature drying and carbonization of raw materials (mainly fruit shells and cores), products with high strength and adsorption capacity can be obtained after activation. The results show that the raw material particle size of 20 ~ 40 mesh is conducive to the penetration of the activator. Compared with the zinc chloride method, the strength of the amorphous carbon is improved, and the iodine value is >950 mg/g, B caramel color >100%, and its production cost is reduced by 40% compared with the physical method.
The chemical activation method is to add a certain amount of chemicals to the carbonaceous raw materials, fully knead and plasticize to produce tar and other adhesive and plasticizing substances, and can be formed without adding additional binders. The preparation method is completed in one step by heating carbon activation. The chemical agents used to prepare granular activated carbon are mainly ZnCl2, H3PO4, KOH, NaOH, H2SO4, CaCl2, K2CO3, etc. Different chemical activators have different activation mechanisms for raw materials.
Binder method
The addition of binders is mainly to solve the problems of the raw materials themselves being non-adhesive, difficult to shape, and unsatisfactory product strength and surface smoothness in the preparation of shaped activated carbon. The type and amount of binders greatly affect the strength and adsorption performance of activated carbon. The addition of binders often blocks some of the pores of granular activated carbon, resulting in increased mechanical strength while reducing its adsorption performance. Common binders include coal tar, starch, wood tar, sulfite pulp waste liquid, clay, waste molasses, carboxymethyl cellulose, resins, etc.
Coal has the advantages of high carbon content, rich resources, and low price, and is widely used as a raw material for the preparation of granular activated carbon. At present, the raw coal used to manufacture coal-based granular activated carbon is non-adhesive and weakly adhesive coal, such as anthracite, weakly sticky coal, lignite, etc. Therefore, a certain amount of binder needs to be added to the raw coal to press it into shape. Since coal tar has a high asphalt content and strong bonding ability to coal powder, most of my country's coal-based activated carbon factories use coal tar as a binder. Du Yaping et al. used coal tar as a binder for petroleum-based granular activated carbon, mixed it with anthracite, extruded it, and activated it to obtain granular activated carbon with high mechanical strength and developed micropores, which can be used as an adsorbent for purifying air or water.
In addition to coal raw materials, researchers have also conducted a lot of research on the preparation of granular activated carbon from wood raw materials and other raw materials. Xia Hongying et al. used tobacco waste as raw material and wood tar as composite binder, and prepared granular activated carbon by steam and carbon dioxide activation methods respectively. The results showed that when activated at 900 °C, the granular activated carbon prepared by steam method was microporous, with a BET specific surface area of 1037 m2/g and a total pore volume of 0.8152 mL/g; the activated carbon prepared by carbon dioxide method was also microporous, with a specific surface area of 947.81 m2/g and a total pore volume of 0.48 mL/g, but the yield was higher than that of steam method.
Send Inquiry




