Problems that should be addressed in the use of powdered activated carbon engineering
Jul 01, 2024
Leave a message
(1) Dust pollution during use. In the use of water plants, powdered activated carbon is labor-intensive and easily causes dust during many links such as loading and unloading, unpacking, preparation, and addition, resulting in poor working conditions and strong conflict among operators. This has become a key and essential problem that restricts the use of powdered activated carbon technology.
According to material reports, some water plants use negative pressure preparation and addition to add powdered activated carbon. This method has basically solved the problem of dust pollution, but it is still difficult to prevent the dust and labor intensity caused by the transportation and unpacking of powdered activated carbon (20 kg/bag). The hourly consumption of powdered activated carbon is generally around 60 kg (calculated at a dosage of 15 mg/L).
(2) The problem of accurate preparation and quantitative addition of powdered activated carbon during use. In order to maintain the effect of powdered activated carbon adsorption and decontamination, the accuracy of the addition measurement should be ensured as much as possible within a certain range. This is not only related to the treatment results, but also closely related to the cost of water production. The entire powdered activated carbon storage, preparation, and dosing equipment or system built according to appropriate parameters must be able to avoid the unstable factors formed in each link, such as the blockage problem in the delivery and dosing process, which will cause the flow to be unstable, thus affecting the decontamination effect.
(3) Automated control of equipment or system. In order to further reduce the operating intensity of the powdered activated carbon dosing equipment, how to achieve automated operation, match it with the original automated control system of the water plant, and how to automatically track and adjust according to the water quality changes to meet the goal of stabilizing the effluent water quality, this is also a key factor restricting the use of this technology.
(4) Investment and cost control. The most critical issue in the use of powdered activated carbon technology is investment and cost control. In order to meet the new "Standards for Drinking Water Hygiene" (mainly CODMn <3 mg/L, not exceeding 5 mg/L under special circumstances), most water companies are facing the problem of technical innovation. For most water companies, water pollution is usually continuous or sudden, and conventional processes can meet the new standard requirements most of the time. Therefore, powdered activated carbon technology is a very applicable technology with relatively low investment, low cost and flexible dosage.
Send Inquiry




