Learning from the Past to predict the future: The State of China's activated carbon industry in the 1990s

May 09, 2025

Leave a message

1,introduction

In recent years, China's activated carbon industry has achieved considerable development. The output of activated carbon has been gradually increasing, and the number of people engaged in activated carbon research has also been growing day by day. The professional Settings in Chinese universities are meticulous, and there are even specialized majors related to activated carbon. Therefore, it can be considered that China's activated carbon industry has established a complete system ranging from activated carbon production, education to scientific research. It is expected that China's activated carbon industry will achieve further development in the future.

However, the problem cannot be ignored either. Many activated carbon manufacturing plants have problems such as low production efficiency, poor working conditions and serious environmental pollution. These problems should be solved as soon as possible in the future.

This article will introduce the current situation of the activated carbon field in China.

2,The manufacturing of activated carbon

(一)The production volume of activated carbon

At present, there are over 200 activated carbon manufacturing plants in China, with an annual production capacity of approximately 100,000 tons. Among them, the majority are small and medium-sized enterprises with an annual production capacity of less than 1,000 tons, and there are relatively few large enterprises.

The changes in China's activated carbon production volume are shown in Table 1. In 1992, the production volume of activated carbon in China reached approximately 70,000 tons. As can be seen from Table 1, since 1981, the production of activated carbon in China has grown rapidly. This is mainly due to the increase in demand for activated carbon driven by industrial development, and the rise in the export volume of activated carbon is also a contributing factor.

info-459-339

Taking 1992 as an example, the classification of the annual production volume of activated carbon is shown in Table 2. At present, both chemical activation and gas activation methods are adopted in the production of activated carbon in China. The output of wood-based raw materials and powdered activated carbon is relatively high. However, in terms of the growth rate of activated carbon production, the growth of formed activated carbon made from coal as raw material is more significant. At present, the annual production capacity of activated carbon factories in China that use coal as raw material is approximately 60,000 tons.

info-736-429

(2)The manufacturing method of activated carbon

1.Gas activation method

(1)raw material

Coal: China is the world's largest producer of coal. Coal mined in Ningxia Hui Autonomous Region, Inner Mongolia and other provinces and regions is suitable for activated carbon production, among which the Taixi coal produced in the Taixi area of Ningxia is the most famous. The composition analysis example of Taixi coal is shown in Table 3.

info-510-304

Nut shells: Commonly used ones include coconut shells, apricot kernel shells and walnut shells, etc.

Charcoal: including pine charcoal, etc.

(2)activator

Water vapor, combustion gas, air.

(3)Gas activation furnace

Mobile bed furnaces: 200-1,000 tons per unit per year; Multi-tube furnaces: 100-150 tons per unit per year; Fluidized bed furnaces: 100-300 tons per unit per year; Herreshoff multi-stage bed furnace with a capacity of 1,000 tons per unit per year and other types.

2.Chemical activation method

(1)Raw materials: sawdust, sugarcane residue, etc.

(2)Activators: zinc chloride, phosphoric acid.

(3)Chemical activation furnaces: rotary kiln, flat plate furnace.

3.The main activated carbon manufacturing plant

The main activated carbon manufacturing plants are shown in Table 4

info-858-696

3,The Application of Activated Carbon

(一)The naming of activated carbon in China

Activated carbon exists in various types due to factors such as starting materials, activation methods, and appearance shapes. Previously, each manufacturing factory named it independently, which led to confusion. In 1990, the state issued the naming method for activated carbon for unified naming. This naming method consists of three parts: A represents the Roman letters of the starting materials (Table 5), B represents the Roman letters of the activation methods (Table 6), C represents the Roman letters of the appearance shape of activated carbon (Table 7), and a number represents the size of activated carbon (Table 8).

info-466-675

For example, ZHF represents powdered activated carbon produced from wood-based raw materials through chemical activation. MWY15 indicates cylindrical activated carbon with a diameter of 15 millimeters, which is produced from coal-based raw materials through gas activation. GWB35×59 indicates crushed granular activated carbon with a particle size range of 0.35 to 0.59 millimeters, which is produced through gas activation using nut shells as raw materials.

info-615-199

However, the naming method has been released for three years and has not been strictly implemented up to now.

(2) the application fields of activated carbon (1) is that almost all of China's powder activated carbon powder activated carbon to wood raw materials, the main species were as follows: (1) with sugar powder activated carbon, with wood raw material through chemical activation, granularity is usually below 200 mesh (76 micron). This is the most produced activated carbon in China, mainly used for decolorization and refinement of glucose and starch sugar solutions, and it is one of the main varieties of activated carbon exported from China. The specifications of wood-based powdered activated carbon for sugar liquid decolorization in China are shown in Table 9.

info-636-403

(2) Medicinal powdered activated carbon: It is produced from wood-based raw materials through chemical activation or gas activation, with a particle size of less than 200 mesh. It is mainly used for decolorization and refinement of pharmaceuticals and industrial drugs. According to the characteristics of different application objects, various specialized carbon types have been manufactured, such as activated carbon specifically for injectable drugs and activated carbon specifically for vitamin C. (3) powder activated carbon used in industry, mainly by the department of wood raw material through activation, chemical activation or gas used in the food industry in areas such as monosodium glutamate, sake, cool potable water, and water treatment and other fields. 2. The granular activated carbon (1) crushing of granular activated carbon: main nuts such as coconut shell as raw material through gas activation. The main uses include catalyst carriers, gold recovery and water treatment, etc.

biological activated carbon

(1) Crushed granular activated carbon: Mainly made from nut shells such as coconut shells through gas activation. The main uses include catalyst carriers, gold recovery and water treatment, etc. (2) forming granular activated carbon: almost all with high quality coal as raw material through gas activation of cylindrical activated carbon (granular). It is widely applied in multiple fields such as air purification, solvent recovery, water treatment, flue gas desulfurization and gas masks. (3) the price of the activated carbon

In recent years, due to the impact of inflation on raw materials and chemical drugs, the sales price of activated carbon in China has also risen. The sales price of activated carbon in China in 1993 is shown in Table 10. For the same category of activated carbon, the sales price can vary depending on factors such as adsorption capacity and impurity content. For example, among wood-based powdered activated carbon, the price of pharmaceutical injection dedicated activated carbon is the highest.

info-622-253

(4) of active carbon trade in China both imports and exports of activated carbon. The main imports are a small amount of specialized carbon seeds, while the export volume is relatively large and increasing year by year. It was reported that the export volume was approximately 10,000 tons in 1992. The activated carbon exported is mainly wood-based powder activated carbon for sugar liquid decolorization. Recently, molded activated carbon has also been exported. Some activated carbon manufacturers in China have a strong willingness to export.

4,Academic activities on activated carbon

There are many institutions engaged in the research of activated carbon in China. The national academic organization is the Activated Carbon Professional Committee of the Forest Products Chemistry and Chemical Engineering Society of the Chinese Society of Forestry. This committee is composed of activated carbon factories, research institutes and universities, etc., and has 13 members. The author has served as the deputy chairperson since 1991. Activated carbon professional committee of the main work includes research of China's activated carbon production, sales, and facing problems, coordination of relevant matters, and host China activated carbon academic seminar. From 1981 to 1991, the 1st to 4th China Activated Carbon Academic Symposiums were held in Chongqing, Taiyuan, Beijing and Shanghai. The 5th symposium is planned to be held in Beijing or Xiamen in 1996, and for the first time, foreign scholars from Japan, the United States, Russia, etc. will be invited to participate. Since China adopted reform and opening-up policy, overseas academic exchanges increasingly active in the field of activated carbon. We have invited Russian scholar M.M.Dubinin and Dr. Mutsuo Kitagawa, the president of the Japan Activated Carbon Technology Research Association, among others, to give lectures in China. Dr. Mutsuo Kitagawa's two lectures in China have been widely praised. In addition, China has also organized multiple delegations to visit West Germany, the Netherlands, Russia, the Philippines and other countries for investigations related to activated carbon.

Send Inquiry